Reamer
Burnishing Reamer
Burnishing Drills
Skiving Tools
Skiving cum Burnishing
Grinding Vice
Contact us
Home

Self Adjustable Reamer : Set Up Instructions

  1. The Self Aligning Mahine Adjustable Reamers are available with taper or straight shanks.
  2. It is advisable that the machine be checked for alignment of centers to ensure best performance.
  3. Preliminary drilling should be followed by light cut in the bore before finishing with The Self Aligning Mahine Adjustable Reamer. This ensures concentricity.
  4. The Self Aligning Mahine Adjustable Reamer should be installed in horizontal plane on laths, turret lathes and automats. Then if necessary rotated to plane of greatest error in machine. The built in pre-determined float will compensate for misalignment and indexing errors.
  5. The Self Aligning Mahine Adjustable Reamers can be used in horizontal, vertical and rotating positions.
  6. Overall stock removal should be 0.08/0.12 m.m. for The Self Aligning Machine Adjustable Reamer 04 to 01 series and 0.12/0.17 m.m. for The Self Aligning Maching Adjustable Reamer 1 to 17 series.
  7. Feed for reaming 0.15 to 1.5 m.m. per revolution according to diameter.

 

|General | Consturction | Setting Size | Dimensions Chart | Set - Up | Tooling Hints | Blades |

| Reamer | Burnishing Reamer | Burnishing Drill | Skiving Tools | Skiving Cum Burnishing Tools |
| Grinding Vice | Home | Contact Us |